-------------------------------------------------------------------
**********************
**********************
Comfort start
• active
• not active
Ignition key just has to be tapped once to start the engine after ignition is turned on. (CAS)
Comfort eject
• active
• not active
Turn off the ignition with a long press on the start/stop button in order to eject the ignition key. (CAS)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (CAS)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (CAS)
Comfort open using keylocks
• active
• not active
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (CAS)
Comfort close using keylocks
• active
• not active
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. (CAS)
Comfort folding for sideview mirrors
• active
• not active
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function
please activate ‘Comfort folding/unfolding for sideview mirrors’ in the ‘FRM’ module. Also activate ‘Comfort open using
remote’ and ‘Comfort close using remote’ in this module. (CAS)
Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (CAS)
**********************
Power Windows
**********************
Power windows after ignition off
• active
• not active
Power windows are active for another minute after ignition is turned off. (CAS)
Power windows after ignition off
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes, for which power windows are active after turning off the ignition. (CAS)
Continue window action when door is opened
• active
• not active
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (FRM)
**********************
Opening
**********************
Easy entry
• active
• not active
Press the unlock button once to unlock all doors. Press it again to lower the driver side window. (CAS)
Easy entry Key 1
• active
• not active
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the
driver side window. (CAS)
Easy entry Key 2
• active
• not active
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the
driver side window. (CAS)
Easy entry Key 3
• active
• not active
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the
driver side window. (CAS)
Easy entry Key 4
• active
• not active
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the
driver side window. (CAS)
Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (CAS)
Selective central locking Key 1
• active
• not active
Separate setting for ‘Selective central locking’ for key 1nUnlocking the car once only unlocks the driver’s door. Unlocking
it again unlocks the other doors, too. (CAS)
Selective central locking Key 2
• active
• not active
Separate setting for ‘Selective central locking’ for key 2nUnlocking the car once only unlocks the driver’s door. Unlocking
it again unlocks the other doors, too. (CAS)
Selective central locking Key 3
• active
• not active
Separate setting for ‘Selective central locking’ for key 3nUnlocking the car once only unlocks the driver’s door. Unlocking
it again unlocks the other doors, too. (CAS)
Selective central locking Key 4
• active
• not active
Separate setting for ‘Selective central locking’ for key 4nUnlocking the car once only unlocks the driver’s door. Unlocking
it again unlocks the other doors, too. (CAS)
Selective central locking – unlock fuel lid
• active
• not active
The fuel lid is also unlocked upon the first unlock, when ‘Selective central locking’ is active. (CAS)
Unlock car when turned off
• active
• not active
Doors are automatically unlocked, when ignition key is ejected. Only works if ‘Lock vehicle at x kph Key 1-4′ is activated.
(CAS)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (FRM)
Optical confirmation unlock vehicle Key 1
• active
• not active
“Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’
for key 1. (FRM)
”
Optical confirmation unlock vehicle Key 2
• active
• not active
“Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’
for key 2. (FRM)
”
Optical confirmation unlock vehicle Key 3
• active
• not active
“Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’
for key 3. (FRM)
”
Audible confirmation – unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’.
(DWA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’.
(DWA)
**********************
Locking
**********************
Lock tailgate when car locked
• active
• not active
Tailgate cannot be unlocked, when car is locked. (CAS)
Automatically lock vehicle duration
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes until doors are locked after car was unlocked but no windows or doors have been opened. (CAS)
Automatically lock vehicle Key 1
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 1nIf no door or window has been opened two minutes after the car
has been unlocked, the doors automatically lock. (CAS)
Automatically lock vehicle Key 2
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 2nIf no door or window has been opened two minutes after the car
has been unlocked, the doors automatically lock. (CAS)
Automatically lock vehicle Key 3
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 3nIf no door or window has been opened two minutes after the car
has been unlocked, the doors automatically lock. (CAS)
Automatically lock vehicle Key 4
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 4nIf no door or window has been opened two minutes after the car
has been unlocked, the doors automatically lock. (CAS)
Lock vehicle upon ignition
• active
• not active
Vehicle is locked, when ignition is turned on. (CAS)
Threshold speed for vehicle locking
• 2 kph / 1 mph
• 6 kph / 4 mph
• 12 kph / 8 mph
• 18 kph / 11 mph
• 24 kph / 15 mph
• 30 kph / 19 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock
vehicle at x kph’ for the according keys. (CAS)
Lock vehicle at x kph Key 1
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 1 is used. (CAS)
Lock vehicle at x kph Key 2
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 2 is used. (CAS)
Lock vehicle at x kph Key 3
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 3 is used. (CAS)
Lock vehicle at x kph Key 4
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 4 is used. (CAS)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (FRM)
Optical confirmation lock vehicle Key 1
• active
• not active
“Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for
key 1. (FRM)
”
Optical confirmation lock vehicle Key 2
• active
• not active
“Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for
key 2. (FRM)
”
Optical confirmation lock vehicle Key 3
• active
• not active
“Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for
key 3. (FRM)
”
Audible confirmation – locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (DWA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (DWA)
**********************
Interior Lights
**********************
Interior lights with remote
• active
• not active
Pressing the lock button on the remote, when the car is already locked, turns on the interior lights. (CAS)
Interior lighting off after 2 minutes
• active
• not active
Interior lighting is automatically turned off after two minutes. (FRM)
Soft turn on/off for interior lighting
• active
• not active
Interior lighting is softly turned on and off. (FRM)
**********************
Alarm System
**********************
Panic alarm with remote
• active
• not active
Press and hold the ‘unlock trunk’ button to trigger the alarm. To activate this function, also activate ‘Panic alarm’ in
the DWA module. (CAS)
Arm/Disarm Anti-Theft Alarm System
• Only with remote
• With locks and remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by
locking/unlocking the car with the remote. (CAS)
Panic alarm
• active
• not active
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on the remote. To activate this function also activate
‘Panic alarm with remote’ in the CAS module. (DWA)
Alarm with dimmed headlights
• active
• not active
Dimmed headlights blink when alarm is initiated. (DWA)
Alarm with high beams
• active
• not active
High beams blink when alarm is initiated. (DWA)
Alarm with warning lights
• active
• not active
Warning lights blink when alarm is initiated. (DWA)
Alarm type
• Europe
• USA
• UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer.
(DWAS)
**********************
Trail gate/Rear lid
**********************
Unlock rear window
• active
• not active
Key unlocks rear window instead of trunk lid in touring models. (CAS)
Unlock rear window key 1
• active
• not active
Key 1 unlocks rear window instead of trunk lid in touring models. (CAS)
Unlock rear window key 2
• active
• not active
Key 2 unlocks rear window instead of trunk lid in touring models. (CAS)
Unlock rear window key 3
• active
• not active
Key 3 unlocks rear window instead of trunk lid in touring models. (CAS)
Unlock rear window key 4
• active
• not active
Key 4 unlocks rear window instead of trunk lid in touring models. (CAS)
Unlock rear window via outside button
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. (CAS)
Unlock rear window via outside button Key 1
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 1. (CAS)
Unlock rear window via outside button Key 2
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 2. (CAS)
Unlock rear window via outside button Key 3
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 3. (CAS)
Unlock rear window via outside button Key 4
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 4. (CAS)
Unlock rear window with footwell switch
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. (CAS)
Open rear window via footwell switch Key 1
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 1. (CAS)
Open rear window via footwell switch Key 2
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 2. (CAS)
Open rear window via footwell switch Key 3
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 3. (CAS)
Open rear window via footwell switch Key 4
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 4. (CAS)
**********************
Ignition
**********************
Prohibit engine start without brake
• active
• not active
Engine can’t be started when brake is not pressed. (CAS)
**********************
Air Conditioning
**********************
Save circulation settings
• not active
• active
Circulation settings are saved for next start of the vehicle. (IHKA)
Show ‘Auto’ in automatic mode
• active
• not active
Auto’ is displayed in automatic mode for air conditioning. (IHKA)
Blower level during automatic A/C
• active
• not active
The current blower level is displayed even during automatic mode of the air conditioning. (IHKA)
Blower symbol
• active
• not active
Show blower symbol. (IHKA)
Off-Mode Memory
• active
• not active
Save setting for ‘Off-mode’ for the air conditioning. (IHKA)
Compressor with A/C in ‘Auto’-mode 1/4
• active
• not active
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this
function, deactivate all functions for ‘Automatic compressor with A/C’. (IHKA)
Compressor with A/C in ‘Auto’-mode 2/4
• active
• not active
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this
function, deactivate all functions for ‘Automatic compressor with A/C’. (IHKA)
Compressor with A/C in ‘Auto’-mode 3/4
• active
• not active
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this
function, deactivate all functions for ‘Automatic compressor with A/C’. (IHKA)
Compressor with A/C in ‘Auto’-mode 4/4
• active
• not active
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this
function, deactivate all functions for ‘Automatic compressor with A/C’. (IHKA)
Residual heat with ‘ALL’-button
• active
• not active
ALL’-button triggers residual heat function of the AC. (IHKA)
**********************
Engine Start Stop
**********************
Start/Stop-Automatic memory
• active
• not active
Setting for Start/Start-Automatic is saved for the next start. (IHKA)
**********************
Instrument Cluster
**********************
Digital speedometer
• active
• not active
Digital speedometer is displayed in dashboard. (KOMBI)
Digital speedometer correction
• true speed
• corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is
a bit higher than the true speed of the car. (KOMBI)
Correction’ analog speedometer
• true speed
• corrected’ speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car.
This has the effect that the shown speed is a bit higher than the true speed of the car. (KOMBI)
Blank line in dashboard
• active
• not active
Blank line in dashboard is displayed/not displayed. (KOMBI)
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (KOMBI)
Permanent speedometer lighting
• active
• not active
Speedometer is always lit, even in the daytime. (KOMBI)
Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (KOMBI)
Cruise Control speed display
• 0s
• 3s
• 6s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (KOMBI)
Daytime running lights in OBC
• active
• not active
Turn daytime running lights on/off in on board computer. Might not work if an iDrive system is installed. (KOMBI)
Light sensitivity in OBC 1/2
• active
• not active
Change light sensitivity in on board computer. Might not work if an iDrive system is installed. (KOMBI)
Light sensitivity in OBC 2/2
• active
• not active
Only change with ‘Light sensitivity in OBC 1/2′. (KOMBI)
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift
indicator’. (KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2′. (KOMBI)
Gear shift indicator key 1
• active
• not active
Gear shift indicator for key 1. (KOMBI)
Gear shift indicator key 2
• active
• not active
Gear shift indicator for key 2. (KOMBI)
Gear shift indicator key 3
• active
• not active
Gear shift indicator for key 3. (KOMBI)
Gear shift indicator key 4
• active
• not active
Gear shift indicator for key 4. (KOMBI)
**********************
Speedometer
**********************
Digital speedometer
• active
• not active
Digital speedometer is displayed in dashboard. (KOMBI)
Digital speedometer correction
• true speed
• corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is
a bit higher than the true speed of the car. (KOMBI)
Correction’ analog speedometer
• true speed
• corrected’ speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car.
This has the effect that the shown speed is a bit higher than the true speed of the car. (KOMBI)
**********************
Warnings
**********************
Speed limit warning
• not active
• 120 kph / 75 mph
• 190 kph / 120 mph
• 210 kph / 130 mph
• 240 kph / 150 mph
Speed limit warning at 120 kph is active/not active. (KOMBI)
Temperature warning
• active
• not active
Temperature warning is active/not active. (KOMBI)
Ignition key warning
• active
• not active
Ignition key warning active/not active. (KOMBI)
Threshold for low range warning
• off
• 20 km / 12 mi
• 50 km / 31 mi
Threshold for acoustic low range warning due to low fuel level. (KOMBI)
Threshold for tank reserve warning
• 6.5 litres
• 8.0 litres
• 10.0 litres
• 12.5 litres
• 20.0 litres
Threshold for tank reserve warning due to low fuel level. (KOMBI)
Lights-on warning
• active
• not active
A warning is shown, when the driver’s door is opened while the lights are still on. (FRM)
Angel Eyes/standing lights warning
• active
• not active
Warning for malfunction of angel eyes and the front standing lights in the on board computer. (FRM)
Turn signals front warning
• active
• not active
Warning for malfunction of front turn signals in the on board computer. (FRM)
Fog lights front warning
• active
• not active
Warning for malfunction of front fog lights in the on board computer. (FRM)
High beams warning
• active
• not active
Warning for malfunction of high beams in the on board computer. (FRM)
Low beams warning
• active
• not active
Warning for malfunction of low beams in the on board computer. (FRM)
Turn signals rear warning
• active
• not active
Warning for malfunction of rear turn signals in the on board computer. (FRM)
Outer brake lights warning
• active
• not active
Warning for malfunction of outer braking lights in the on board computer. (FRM)
Inner brake lights warning
• active
• not active
Warning for malfunction of inner braking lights in the on board computer. (FRM)
Third brake light warning
• active
• not active
Warning for malfunction of third brake light in the on board computer. (FRM)
Tail lights warning
• active
• not active
Warning for malfunction of tail lights in the on board computer. (FRM)
Reversing lights warning
• active
• not active
Warning for malfunction of reversing lights in the on board computer. (FRM)
License plate light warning
• active
• not active
Warning for malfunction of license plate lights in the on board computer. (FRM)
Rear fog light left warning
• active
• not active
Warning for malfunction of rear left fog light in the on board computer. (FRM)
Rear fog light right warning
• active
• not active
Warning for malfunction of rear right fog light in the on board computer. (FRM)
Seat belt warning
• not active
• active
Various settings for the seat belt warning. (CSM)
Seat belt reminder driver
• not active
• active
Seat belt reminder for driver is active/ inactive. (CSM)
Seat belt reminder passenger
• not active
• active
Seat belt reminder for passenger is active/ inactive. (CSM)
**********************
Daytime Running Light
**********************
Daytime running lights in OBC
• active
• not active
Turn daytime running lights on/off in on board computer. Might not work if an iDrive system is installed. (KOMBI)
Daytime running lights 1/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the
car. Please activate ‘Daytime running lights 2/2′ as well. (FRM)
Daytime running lights 2/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the
car. Please activate ‘Daytime running lights 1/2′ as well. (FRM)
Daytime running lights – Key 1
• active
• not active
“Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 1. (FRM)
”
Daytime running lights – Key 2
• active
• not active
“Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 2. (FRM)
”
Daytime running lights – Key 3
• active
• not active
“Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 3. (FRM)
”
Daytime running lights customization
• not active
• dimmed turn signals
• dimmed high beams
Customization of the daytime running lights. Brightness can be set with ‘Daytime running lights brightness’. (FRM)
Daytime running lights brightness
• very low
• low
• medium
• high
• very high
Brightness for dimmed daytime running lights. To use this function, also activate ‘Daytime running lights customization’.
(FRM)
Daytime running lights – customization
• Off
• Low beams
• High beams
• Only additional lights (EU models)
• Only additional lights (US models)
“Customization of the daytime running lights (DRL). The DRL is activated when the light switch is set to position ‘0’ in the
car. (FRM)
”
Daytime running lights – high beams brightness
• off
• very low
• low
• medium
• high
• very high
“Brightness of high beams for daytime running lights. To activate the high beams for daytime running lights, set ‘Daytime
running lights – customization’ to ‘High beams’. (FRM)
”
Daytime running lights – front fog lights
• active
• not active
“Use front fog lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’.
(FRM)
”
Daytime running lights – front fog lights brightness
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
“Brightness for ‘Daytime running lights – front fog lights’. (FRM)
”
Daytime running lights – front turn signals
• active
• not active
“Use front turn signals as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’.
(FRM)
”
Daytime running lights – angel eyes
• active
• not active
“Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (FRM)
”
Angel eyes brightness daytime running lights
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (FRM)
Daytime running lights – sidemarker
• active
• not active
“Use sidemarkers as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (FRM)
”
Daytime running lights – number plate lighting
• active
• not active
“Use number plate lighting as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’.
(FRM)
”
Daytime running lights – tail lights
• active
• not active
“Use tail lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (FRM)
”
Daytime running lights – inner brake lights
• active
• not active
“Use inner brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’.
(FRM)
”
Daytime running lights – 3rd brake lights
• active
• not active
“Use 3rd brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’.
(FRM)
”
Brightness of Angel Eyes 1 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (FRM)
Brightness of Angel Eyes 2 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (FRM)
Brightness of Angel Eyes 3 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (FRM)
Daytime running lights
• standard
• permanently on
• permanently off
Set mode of daytime running lights. (CIC)
**********************
Gear Shift Indicator
**********************
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift
indicator’. (KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2′. (KOMBI)
Gear shift indicator key 1
• active
• not active
Gear shift indicator for key 1. (KOMBI)
Gear shift indicator key 2
• active
• not active
Gear shift indicator for key 2. (KOMBI)
Gear shift indicator key 3
• active
• not active
Gear shift indicator for key 3. (KOMBI)
Gear shift indicator key 4
• active
• not active
Gear shift indicator for key 4. (KOMBI)
**********************
Mirros
**********************
Mirror tilt 2/2
• active
• not active
Requirement for mirror tilt functions. (FRM)
Tilt mirror in reverse
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching
into reverse gear. To activate this function activate ‘Mirror tilt’, aswell. (FRM)
Comfort folding for sideview mirrors
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the
remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (FRM)
Electrochromatic mirror dimming
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating)nSide mirrors automatically dim
electrochromatic. (FRM)
**********************
Seatbelt Hand-over
**********************
Seatbelt Hand-Over
• active
• not active
Automatic seatbelt hand-over is active/inactive. (FRM)
Seatbelt Hand-Over driver
• active
• not active
“Automatic seatbelt hand-over for driver is active/inactive. (FRM)
”
Seatbelt Hand-Over passenger
• active
• not active
“Automatic seatbelt hand-over for passenger is active/inactive. (FRM)
”
**********************
High Beam Flasher
**********************
Flasher with bi-xenon
• active
• not active
Bi-xenon lamps are used for flasher. (FRM)
Front fog lights with flasher
• active
• not active
“Front fog lights are automatically turned off when activating flasher. (FRM)
”
**********************
High Beam
**********************
Front fog lights with high beams
• active
• not active
Front fog lights are automatically turned off when activating high beams. (FRM)
**********************
Parking Light
**********************
Comfort standing light
• active
• not active
If the light switch is set at automatic or on, the parking lights remain on, until the vehicle is locked with the remote. (FRM)
**********************
Turn signals
**********************
Hazard lights
• standard
• double
Hazard lights blink once or twice. (FRM)
Crash lights
• standard
• double
Hazard lights blink once or twice upon an accident. (FRM)
One-touch turn signal function
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. If available, please activate this option for the different keys as well.
(FRM)
One-touch turn signal function Key 1
• 1
• 3
• 5
“Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 1. (FRM)
”
One-touch turn signal function Key 2
• 1
• 3
• 5
“Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 2. (FRM)
”
One-touch turn signal function Key 3
• 1
• 3
• 5
“Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 3. (FRM)
”
Turn signals front as LED
• active
• not active
“Activate this option if you have replaced the turn signals front with LED bulbs. (FRM)
”
Turn signals rear as LED
• active
• not active
“Activate this option if you have replaced the turn signals rear with LED bulbs. (FRM)
”
**********************
Cornering Light
**********************
Cornering lights 1/3
• active
• not active
“Use front fog lights/high beams as cornering lights. Also, this function often requires adaptive headlights to be installed.
(FRM)
”
Cornering lights 2/3
• active
• not active
“Only change this function with ‘Cornering lights 1/3′. (FRM)
”
Cornering lights 3/3
• active
• not active
“Only change this function with ‘Cornering lights 1/3′. (FRM)
”
Cornering lights – front fog lights
• active
• not active
“Front fog lights are used as cornering lights. Only works if ‘Cornering lights’ is also activated. (FRM)
”
Cornering lights – reverse gear
• active
• not active
“Use cornering lights also when reversing. Only works if ‘Cornering lights’ is also activated. (FRM)
”
Cornering lights – brightness
• off
• low
• medium
• high
“Brightness of ‘Cornering lights’. Only works if ‘Cornering lights’ is also activated. (FRM)
”
Cornering lights – key 1
• active
• not active
“Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 1. Only works if ‘Cornering lights
’ is also activated. (FRM)
”
Cornering lights – key 2
• active
• not active
“Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 2. Only works if ‘Cornering lights
’ is also activated. (FRM)
”
Cornering lights – key 3
• active
• not active
“Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 3. Only works if ‘Cornering lights
’ is also activated. (FRM)
”
Cornering lights – key 4
• active
• not active
“Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 4. Only works if ‘Cornering lights
’ is also activated. (FRM)
”
**********************
Brake lights
**********************
Brake force display
• active
• not active
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. (FRM)
Brake force display 1/2
• active
• active (alternative)
“Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. To
activate this function, set ‘Brake force display 2/2′ to ‘active’. (FRM)
”
Brake force display 2/2
• active
• active (alternative)
• not active
“Only change this function with ‘Brake force display 1/2′. (FRM)
”
Brake force display – minimum speed
• 20 kph / 12 mph
• 50 kph / 31 mph
“Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well.
(FRM)
”
Brake force display – blinking speed
• slow
• fast
“Blinking speed for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (FRM)
”
Brake force display – angel eyes
• not active
• on
• flashing
Customization for angel eyes for brake force display. In order to enable this option, activate ‘Brake force display’ as well.
(FRM)
Brake force display – outer brake lights
• not active
• on
• flashing
Customization for outer brake lights for brake force display. In order to enable this option, activate ‘Brake force display’
as well. (FRM)
Brake force display – inner brake lights
• on
• flashing
Customization for inner brake lights for brake force display. In order to enable this option, activate ‘Brake force display’
as well. (FRM)
Brake force display – third brake light
• not active
• on
• flashing
Customization for third brake lights (rear window) for brake force display. In order to enable this option, activate ‘Brake
force display’ as well. (FRM)
Brake force display – tail lights
• not active
• on
• flashing
Customization for tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as
well. (FRM)
Brake force display – rear fog lights
• not active
• on
• flashing
Customization for rear fog lights for brake force display. In order to enable this option, activate ‘Brake force display’ as
well. (FRM)
**********************
Angel Eyes
**********************
Daytime running lights – angel eyes
• active
• not active
“Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (FRM)
”
Angel eyes brightness daytime running lights
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (FRM)
Angel eyes brightness standing lights
• off
• very low
• low
• medium
• high
• very high
Brightness of Angel Eyes (Corona rings) for standing lights. (FRM)
Angel eyes brightness parking lights
• off
• very low
• low
• medium
• high
• very high
“Brightness of Angel Eyes (Corona rings) for parking lights. (FRM)
”
Brightness of Angel Eyes 1 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (FRM)
Brightness of Angel Eyes 2 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (FRM)
Brightness of Angel Eyes 3 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (FRM)
**********************
Sidemarker
**********************
Sidemarker (US)
• active
• not active
Sidemarkers are permanently active. May need additional ‘Sidemarker (US)’ functions set to ‘active’ if available. (FRM)
Sidemarker (US) brightness
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness for ‘Sidemarker (US)’. (FRM)
**********************
Corner LESs
**********************
Corner LEDs
• active
• not active
Corner LEDs are active/not active – also known as ‘Corner Delete Mod’. This function often only works on US models to
deactivate the corner LEDs. (FRM)
Corner LEDs brightness – low beams
• off
• low
• medium
• high
“Brightness of corner LEDs when low beams are active. (FRM)
”
Corner LEDs brightness – high beams
• off
• low
• medium
• high
“Brightness of corner LEDs when high beams are active. (FRM)
”
**********************
Voltage Monitoring
**********************
Angel Eyes voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes. Might cause flickering of LED lights. (FRM)
Angel Eyes voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Sidemarker voltage monit. 1/2
• active
• not active
“Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (FRM)
”
Sidemarker voltage monit. 2/2
• active
• not active
“Deactivate with ‘Sidemarker voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
”
Turn signals front voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (FRM)
Turn signals front voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for fog lights. Might cause flickering of LED lights. (FRM)
Fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Fog lights voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
High beams voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (FRM)
High beams voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Low beams voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (FRM)
Low beams voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Turn signals rear voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (FRM)
Turn signals rear voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Braking lights voltage monit. 1/2
• active
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (FRM)
Braking lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Braking lights voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Inner brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for inner brake light. Might cause flickering of LED lights. (FRM)
Inner brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Inner brake light voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (FRM)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Tail lights voltage monit. 1/2
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (FRM)
Tail lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Tail lights voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Reversing lights voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (FRM)
Reversing lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (FRM)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Rear fog lights voltage monit. 1/2
• active
• not active
“Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (FRM)
”
Rear fog lights voltage monit. 2/2
• active
• not active
“Deactivate with ‘Rear fog lights voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
”
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (FRM)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (FRM)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2′ to disable flickering of LED lights. (FRM)
**********************
Coming Home
**********************
Activate follow me home lights
• active
• not active
Follow me home lights are active/not active. (FRM)
Follow me home lights with remote
• active
• not active
“Quickly press the ‘Open trunk’ button twice to activate the follow me home lights. In some circumstances the function
‘Panic mode remote’ in the CAS has to be activated, too. (FRM)
”
Cancel follow me home lights
• active
• not active
Follow me home lights are cancelled, when activating the flasher again. (FRM)
Extend follow me home lights
• active
• not active
Follow me home lights are displayed longer, when activating the flasher again. (FRM)
Follow me home lights duration
• off
• 40s
• 90s
• 150s
• 240s
Duration of follow me home lights in seconds. To activate follow me home lights, activate the flasher, while the enginge is
off. (FRM)
Follow me home lights duration Key 1
• off
• 40s
• 90s
• 150s
• 240s
“Separate setting for duration in seconds of follow me home lights for key 1. (FRM)
”
Follow me home lights duration Key 2
• off
• 40s
• 90s
• 150s
• 240s
“Separate setting for duration in seconds of follow me home lights for key 2. (FRM)
”
Follow me home lights duration Key 3
• off
• 40s
• 90s
• 150s
• 240s
“Separate setting for duration in seconds of follow me home lights for key 3. (FRM)
”
**********************
Welcome Light
**********************
Welcome lights
• active
• not active
“Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car
has to be set to ‘Auto’. (FRM)
”
Welcome lights Key 1
• active
• not active
“Separate setting for ‘Welcome lights’ for key 1. (FRM)
”
Welcome lights Key 2
• active
• not active
“Separate setting for ‘Welcome lights’ for key 2. (FRM)
”
Welcome lights Key 3
• active
• not active
“Separate setting for ‘Welcome lights’ for key 3. (FRM)
”
Welcome lights Key 4
• active
• not active
“Separate setting for ‘Welcome lights’ for key 4. (FRM)
”
Welcome lights duration
• off
• 5s
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
“Duration of the welcome lights in seconds. (FRM)
”
Welcome lights – low beams
• not active
• turn on softly
• turn on hard
“Low beams are turned on with welcome lights. (FRM)
”
Welcome lights – brake force display
• not active
• turn on softly
• turn on hard
“Brake force display is turned on with welcome lights. (FRM)
”
Welcome lights – braking lights
• not active
• turn on softly
• turn on hard
“Braking lights are turned on with welcome lights. (FRM)
”
Welcome lights – turn signals front
• not active
• turn on softly
• turn on hard
“Turn signals front are turned on with welcome lights. To activate this function you may need to additionally code
‘Sidemarker (US) brightness’ to ‘very low’ or higher. (FRM)
”
Welcome lights – turn signals rear
• not active
• turn on softly
• turn on hard
“Turn signals rear are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker
(US) brightness’ to ‘very low’ or higher. (FRM)
”
Welcome lights – high beams
• not active
• turn on softly
• turn on hard
“High beams are turned on with welcome lights. (FRM)
”
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on hard
“Number plate lights are turned on with welcome lights. (FRM)
”
Welcome lights – front fog lights
• not active
• turn on softly
• turn on hard
“Front fog lights are turned on with welcome lights. (FRM)
”
Welcome lights – rear fog lights
• not active
• turn on softly
• turn on hard
“Rear fog lights are turned on with welcome lights. (FRM)
”
Welcome lights – corner LEDs
• not active
• turn on softly
• turn on hard
“Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on. (FRM)
”
Welcome lights – standing lights front
• not active
• turn on softly
• turn on hard
“Standing lights front are turned on with welcome lights. (FRM)
”
Welcome lights – standing lights rear
• not active
• turn on softly
• turn on hard
“Standing lights rear are turned on with welcome lights. (FRM)
”
**********************
Cleaning
**********************
Wiping interval standstill
• 3s
• 5s
Interval in seconds for windscreen wipers at standstill. (JBBF)
Wiping interval rear window
• not active
• 2s
• 4s
• 6s
• 8s
• 12s
Interval in seconds for windscreen rear window wipers. (JBBF)
Rear wiper in reverse gear
• not active
• active
Rear wiper automatically turns on in reverse gear. (JBBF)
Complete wiping cycle
• not active
• active
Wiping cycle is completed, when ignition is turned off. (JBBF)
Wipe delay after windowscreen cleaning
• 0.1s
• 0.3s
• 0.5s
• 0.7s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (JBBF)
Wipe delay after rear window cleaning
• 0.1s
• 0.3s
• 0.5s
• 0.7s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (JBBF)
Number of wipes after windscreen cleaning
• 1
• 2
• 3
• 4
Number of wipes after windscreen is cleaned. (JBBF)
Number of wipes after rear window cleaning
• 1
• 2
• 3
• 4
Number of wipes after rear window is cleaned. (JBBF)
Head light cleaning
• active
• not active
Turn head light cleaning on/off. (JBBF)
Number until headlight cleaning
• 3
• 5
• 7
Head lights are cleaned every x-th time the windscreen washer has been activated. (JBBF)
Number of splashes for head lights
• 2
• 3
Number of splashes for cleaning the head lights. (JBBF)
Length of splash for head lights
• 0.7s
• 1s
• 0.5s
Length of a single splash for head light cleaning. (JBBF)
Delay between splashes for head lights
• 1.3s
• 1s
• 1.5s
Delay between splashes for head light cleaning. (JBBF)
**********************
Headlight Cleaning
**********************
Head light cleaning
• active
• not active
Turn head light cleaning on/off. (JBBF)
Number until headlight cleaning
• 3
• 5
• 7
Head lights are cleaned every x-th time the windscreen washer has been activated. (JBBF)
Number of splashes for head lights
• 2
• 3
Number of splashes for cleaning the head lights. (JBBF)
Length of splash for head lights
• 0.7s
• 1s
• 0.5s
Length of a single splash for head light cleaning. (JBBF)
Delay between splashes for head lights
• 1.3s
• 1s
• 1.5s
Delay between splashes for head light cleaning. (JBBF)
**********************
Convertible
**********************
Speed limit roof open/close
• 6 kph / 4 mph
• 30 kph / 19 mph
• 50 kph / 31 mph
Speed limit for closing/opening the roof while driving. For pre-facelift models 30 kph is recommended, due to the less stable
construction of the roof. (CTM)
**********************
Legal Disclaimer
**********************
Legal disclaimer (US)
• active
• not active
Show legal disclaimer when iDrive is started. (CIC)
Camera disclaimer
• active
• active (6 seconds)
• not active
Show legal disclaimer for rear view camera. (CIC)
Night Vision disclaimer
• active
• active (6 seconds)
• not active
Show legal disclaimer for night vision view camera. (CIC)
**********************
Video in Motion
**********************
Video in motion 1/2
• active
• not active
Enable video and DVD while driving. In order to enable this option, activate ‘Video in motion 2/2′ as well. (CIC)
Video in motion 2/2
• active
• not active
Only change this function with ‘Video in motion 1/2′. (CIC)
**********************
Park Distance Control (PDC)
**********************
PDC view
• vertical (F-Models)
• horizontal (E-Models)
Direction of park distance control view. (CIC)
**********************
iDrive Menus
**********************
Audible confirmation menu
• active
• not active
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the DWA module is installed.
(CIC)
Address book menu
• active
• not active
Show menu for address book in iDrive. (CIC)
Notepad menu
• active
• not active
Show menu for notepad in iDrive. (CIC)
**********************
Telephone
**********************
Telephone ringtone
• BMW
• Mini
Customize telephone ringtone. (CIC)
**********************
**********************
